Outdoor cushions
Outdoor & Patio Cushions – Lanai, Pool & Fire Pit Cushions in Venice, FL
We proudly serve Venice, FL and the surrounding area, including Nokomis, Osprey, Englewood, North Port, Port Charlotte, Rotonda West, Boca Grande, Punta Gorda, Sarasota and beyond.
Overview
Why Outdoor Cushions Fail Faster in Florida
Outdoor cushions have a hard life in Florida: humid air, afternoon rain and full sun, every day. Apogee Upholstery rebuilds outdoor and patio cushions at our shop in Venice, FL for homeowners, condo associations and clubhouses from Nokomis to Englewood, North Port, Port Charlotte and Sarasota.
We replace flattened foam with quick-dry reticulated foam that drains instead of holding water, sew new covers in solution-dyed acrylics such as Sunbrella, and template curved and built-in seating on site so the cushions follow the stonework. We also build fitted covers that keep the new cushions out of the weather.
Humidity flattens open-cell foam
Open-cell foam soaks up humidity and rain, loses its loft and never fully dries. Reticulated foam lets water run straight through.
Mildew starts inside
Wet foam under a tight cover is where black spots begin. Quick-dry foam, mesh venting and solution-dyed fabric starve mildew of the damp it needs.
Sun fades printed fabric
Printed polyester fades on the sunny side first and tears once the fibers weaken. Solution-dyed acrylic is colored through the fiber and holds up in direct sun.
Stock sizes do not fit built-ins
Curved fire pit benches, banquettes and lanai built-ins are not catalog shapes. We template them on site so every section follows the stone.
What we do
Our Outdoor & Patio Cushion Services
Lanai & Patio Seat Cushions
Sofa, loveseat and chair cushions rebuilt on new foam and re-covered in Sunbrella-type solution-dyed acrylic, patterned from your originals or measured from the frames.
- New foam, original profile or thicker
- Solution-dyed acrylic in solids, stripes and textures
- Zippered, washable covers
Chaise & Pool Lounge Cushions
Pool loungers get wet every day. We build chaise cushions on quick-dry reticulated foam with mesh venting sewn into the cover, so water drains and the cushion dries fast.
- Quick-dry reticulated foam
- Mesh venting sewn into the cover
- Ties, straps or hinged sections
Curved & Built-In Seating
Fire pit benches, banquettes and poolside built-ins are templated on site so the cushions follow the curve, then each section is numbered, built and fitted in place.
- Templates taken from the stone or frame
- Sections that lift off for cleaning and storms
- Matching back cushions, bolsters and pillows
Outdoor Furniture Covers
A fitted cover is the simplest way to make new cushions last. We build covers for fire pit seating, dining sets, loungers and sectionals in boat-cover fabrics, with vents and tie-downs.
- Fire pit, dining set, lounge and sectional covers
- Vents to stop condensation underneath
- Tie-downs and buckles for wind
Pillows, Bolsters & Sling Replacement
Throw pillows and bolsters finish a lanai, and worn sling fabric sidelines a good chair. We sew pillows to match and replace sling seats and backs in outdoor mesh.
- Pillows and bolsters in coordinating fabric
- Sling chair and chaise fabric replacement
- Welting, flange and contrast options
Commercial, HOA & Clubhouse Seating
Pool decks and clubhouses see more traffic than any home patio. We rebuild community seating in matched sets, in heavy-use fabric and foam, on a schedule that keeps the pool open.
- Matched sets for pool decks and clubhouses
- Fabric and foam rated for heavy use
- Staged scheduling around residents
Experience
Outdoor Seating We Rebuild
- Lanai sofas and sectionals
- Pool chaise lounges
- Fire pit benches and curved seating
- Outdoor dining chairs
- Sling chairs and chaises
- Clubhouse and pool deck furniture
Materials We Use
- Quick-dry reticulated foam
- Open-structure foam that drains in minutes and dries fast, for chaises, pool furniture and anything uncovered.
- Solution-dyed acrylic fabric
- Sunbrella and comparable fabrics colored through the fiber, so they resist fading and mildew and clean with soap and water.
- Outdoor mesh and sling fabric
- Vinyl-coated polyester mesh for venting, cushion bottoms and sling chair replacement.
- UV-resistant thread and hardware
- Bonded polyester or PTFE thread, plastic zippers and stainless or nylon fasteners that do not rust.
How it works
Our Process
- 1
Photos or a site visit
Send photos and rough measurements through the contact page, or bring the cushions to the shop. For curved and built-in seating, we come out and template on site.
- 2
Foam and fabric
You pick fabric from Sunbrella-type samples in the shop. We specify quick-dry foam for anything that gets wet and high-density foam for covered lanais.
- 3
Patterns and cutting
Covers are patterned from your originals or our templates, with zippers, venting and ties where the furniture needs them.
- 4
Sewing
Seams are sewn in UV-resistant thread, corners boxed and welted where the original had it, and every cover is checked on its foam.
- 5
Fitting and covers
Cushions go back on the furniture, built-in sections are set in place and any fitted covers are tried on so they tie down right.
Track record
The Numbers Speak for Themselves
- 0+
- Years of industry experience
- 0%
- Customer satisfaction guarantee
- 0★
- Rated service on Google
- 0+
- Cities served across SW Florida
Why Apogee
Why Choose Apogee for Outdoor Cushions
Our team works closely with you to design and install the right upholstery, canvas or cover, balancing function and style. Whether it is a simple repair or a full custom interior, we guarantee results that stand the test of time.
- ✓Quick-dry foam that drains instead of soaking up Florida rain
- ✓Solution-dyed acrylic fabrics chosen for sun, humidity and mildew
- ✓Curved and built-in seating templated on site
- ✓Matching covers, pillows and sling replacement from one shop
- ✓HOA, condo and clubhouse projects scheduled around residents
- ✓Voted Best Upholstery Service in Venice 2024 by Venice Gondolier readers
Portfolio
Recent Projects
FAQ
Outdoor & Patio Cushions FAQ
Can you replace just the foam in my outdoor cushions?
Yes, if the covers are still sound. Flat, heavy or musty cushions usually have waterlogged foam under fabric that still looks fine. We open the cover, fit quick-dry reticulated foam cut to the original profile and reassemble it. If the fabric has faded or the seams are weak, we will say so.
What is the best fabric for outdoor cushions in Florida?
Solution-dyed acrylic such as Sunbrella is what we recommend for most lanai, pool and fire pit cushions. The color runs through the fiber, so it resists fading, and it dries quickly and resists mildew. Printed polyester costs less but fades and weakens in Gulf Coast sun.
How do you keep pool cushions from growing mildew?
Quick-dry reticulated foam drains instead of holding water, mesh venting lets the cushion breathe, and solution-dyed acrylic does not feed mildew the way cotton-backed fabric does. Standing cushions on edge after heavy rain helps, and a fitted cover keeps them dry between uses.
Can you make cushions for a curved fire pit or built-in bench?
Yes. Curved and built-in seating is some of our most common outdoor work. We template the stone or frame on site, number each section and build cushions that follow the curve and lift off for cleaning or a storm. Matching backs, bolsters and a fitted cover can be built at the same time.
Do you work with HOAs, condo associations and clubhouses?
We do. Pool deck loungers, clubhouse seating and common lanai furniture are rebuilt in matched sets in fabric and foam chosen for heavy use. We schedule in stages so the pool deck stays open, and can quote fitted covers to protect the new cushions.
Where do I bring my cushions?
To our shop at 420 E Venice Ave in Venice, FL, open Monday through Friday from 9:00 AM to 5:00 PM. Most cushions fit in a car. For built-in seating or a large community set, we come out to measure across Venice, Nokomis, Englewood, North Port, Port Charlotte and Sarasota.
Serving Southwest Florida
Our shop is at 420 E Venice Ave, Venice, FL 34285, with trailer parking for drop-offs. We regularly work with customers from:
- Venice, FL
- Nokomis, FL
- Osprey, FL
- Englewood, FL
- North Port, FL
- Port Charlotte, FL
- Rotonda West, FL
- Boca Grande, FL
- Punta Gorda, FL
- Sarasota, FL
Other Services
Ready to upgrade? Let's talk about your outdoor & patio cushions project.
Give your boat, car, RV or golf cart the upgrade it deserves with custom-crafted cushions, covers and finishes built for comfort, durability, and style.