Marine upholstery
Boat Upholstery Services – Premium Marine Upholstery in Venice, FL
We proudly serve Venice, FL and the surrounding area, including Nokomis, Osprey, Englewood, North Port, Port Charlotte, Rotonda West, Boca Grande, Punta Gorda, Sarasota and beyond.
Overview
Why Boat Upholstery Matters in Florida
Apogee Upholstery restores and custom-builds boat interiors for owners across Venice, Nokomis, Osprey, Englewood, North Port, Port Charlotte, Rotonda West, Boca Grande, Punta Gorda and Sarasota. Center consoles, pontoons, deck boats, bay boats, cabin cruisers and personal watercraft all come through the same shop door on E Venice Ave.
Every seat is patterned from your boat, rebuilt with closed-cell marine foam and sewn in marine-grade vinyl with UV-resistant thread. The result is seating that looks factory-new, sits firmer than it did the day you bought the boat, and holds up to Gulf Coast sun, salt spray and summer humidity.
UV & weather resistance
Marine vinyl with UV inhibitors and mildew-resistant backing that does not chalk, crack or fade after one season of Florida sun.
Durability & longevity
Closed-cell foam, bonded or PTFE thread and stainless hardware chosen because they survive salt, heat and daily use.
Custom fit & style
Two-tone combinations, diamond stitching, contrast piping and embroidery tailored to your hull color and personal taste.
Easy maintenance
Stain-resistant, wipe-clean surfaces that handle sunscreen, bait and spilled drinks without staining.
What we do
Our Boat Upholstery Services
Custom Boat Seat Upholstery & Cushion Replacement
Bench seats, captain's chairs, bow seating and lounge cushions take the most wear on any boat. We reupholster each piece on new foam so the seat profile is restored, not just re-covered.
- High-density and closed-cell marine foam
- Reinforced, UV-rated stitching on every seam
- Non-slip, waterproof marine vinyl in dozens of colors
Marine Sun Pads & Lounge Cushions
Sun pads, bow fillers and deck lounges built for relaxing on the water, with quick-drying materials and the foam thickness you ask for.
- Water-resistant, quick-drying construction
- Custom foam thickness for comfort
- Color-matched or contrast stitching
Pontoon Furniture & Wraparound Lounges
Pontoon seating is a lot of surface area and a lot of seams. We rebuild lounges, captain's chairs and bar seating with new foam and hinged, snap-fitted covers that match the original layout.
- Full lounge and corner rebuilds
- Mold-resistant foam and backing
- Two-tone and accent panel options
Helm Seats, Bolsters & Leaning Posts
The helm seat gets more individual use than any other seat on the boat. We rebuild helm benches, flip-up bolsters, leaning posts and cooler seats with reinforced bases and fresh foam.
- Diamond-stitched inserts and accent panels
- Flip-up bolster and leaning post rebuilds
- Hardware inspection and replacement
Boat Carpet & Flooring Replacement
Upgrade worn floors with marine carpet, EVA foam decking or synthetic teak, cut to your deck for a seamless install.
- Slip-resistant, mold-resistant surfaces
- Custom-cut flooring for a clean fit
- Easy-to-clean, high-durability materials
Protective Boat Covers & Bimini Tops
New upholstery deserves protection. We build custom boat covers, bimini tops and T-top canvas from the same patterns, so the cover fits as well as the seats.
- UV-resistant, waterproof marine fabrics
- Snug, wind-resistant fit for trailering and dock storage
- Full range of colors and materials
Experience
Boats We Reupholster
- Center console fishing boats
- Pontoon and tritoon boats
- Deck boats and bowriders
- Bay boats and flats skiffs
- Cabin cruisers and express cruisers
- Sailboat cockpits and cabins
- Jet skis and personal watercraft
- Yachts and sportfish
Materials We Use
- Marine-grade vinyl
- UV-stabilized, mildew-resistant vinyl with a cold-crack rating, in matte, textured and perforated finishes.
- Closed-cell marine foam
- Does not absorb water, keeps its density and prevents the mold pockets that form under old open-cell foam.
- UV-resistant thread
- Bonded polyester or PTFE thread so the seam, not the vinyl, is never the first thing to fail.
- Stainless hardware
- Snaps, staples and fasteners that do not rust-streak your gelcoat.
How it works
Our Process
- 1
Consultation & free quote
Call, send photos through the contact page or bring the boat to the shop. You get a clear quote for materials and labor before any work starts.
- 2
Patterns taken from your boat
Every panel is patterned individually. Nothing on a boat is truly symmetrical, and the fit shows it.
- 3
Foam, vinyl and thread selection
You choose colors and stitch style; we specify the foam density and backing that suits how the boat is used.
- 4
Sewing & assembly
Seams are sewn with UV-rated thread, corners are boxed and welted, and every cover is test-fitted before it leaves the bench.
- 5
Installation & final fit
New hardware where it is needed, snaps and staples set in fresh material, and a final check with you at pickup.
Track record
The Numbers Speak for Themselves
- 0+
- Years of industry experience
- 0%
- Customer satisfaction guarantee
- 0★
- Rated service on Google
- 0+
- Cities served across SW Florida
Why Apogee
Why Choose Apogee Upholstery for Marine Upholstery?
Our team works closely with you to design and install the right upholstery, canvas or cover, balancing function and style. Whether it is a simple repair or a full custom interior, we guarantee results that stand the test of time.
- ✓Expert craftsmanship with years of marine upholstery experience
- ✓Premium marine-grade materials built for Florida's climate
- ✓Custom designs and professional finishes tailored to your boat
- ✓Fast turnaround times to get you back on the water
- ✓Voted Best Upholstery Service in Venice 2024 by Venice Gondolier readers
- ✓Fenced boat and trailer parking at the shop for easy drop-off
Portfolio
Recent Projects
FAQ
Boat Upholstery FAQ
How much does boat upholstery cost?
It depends on the number of seats, the foam condition and the vinyl you choose. A single helm seat is a small job; a full pontoon or deck boat interior is a multi-week project. We give free, itemized quotes after seeing the boat or clear photos.
How long does boat seat reupholstery take?
Individual seats and cushions usually take a few days once materials are in. Full interiors typically take one to two weeks depending on the size of the boat and our schedule.
Can you just replace the vinyl and keep my foam?
We can, but on Florida boats the foam is usually degraded even when the vinyl looks acceptable. Re-covering compressed foam gives a lumpy result and traps moisture. We recommend new closed-cell foam on most jobs and will tell you honestly if yours is still good.
Do you match factory colors and patterns?
Yes. We keep a wide range of marine vinyl colors and textures and can match or complement the original look, or build a new two-tone or diamond-stitched design.
Do you work on pontoon boats?
Pontoons are one of our most common projects. We rebuild lounges, captain's chairs, bar seating and cushions, and can build a matching custom pontoon cover.
Which areas do you serve?
Our shop is at 420 E Venice Ave in Venice, FL. Customers come from Nokomis, Osprey, Englewood, North Port, Port Charlotte, Rotonda West, Boca Grande, Punta Gorda and Sarasota.
Serving Southwest Florida
Our shop is at 420 E Venice Ave, Venice, FL 34285, with trailer parking for drop-offs. We regularly work with customers from:
- Venice, FL
- Nokomis, FL
- Osprey, FL
- Englewood, FL
- North Port, FL
- Port Charlotte, FL
- Rotonda West, FL
- Boca Grande, FL
- Punta Gorda, FL
- Sarasota, FL
Other Services
Ready to upgrade? Let's talk about your boat upholstery project.
Give your boat, car, RV or golf cart the upgrade it deserves with custom-crafted cushions, covers and finishes built for comfort, durability, and style.