Marine repairs
Boat Seat Repair – Torn Vinyl, Split Seams & Flat Cushions Fixed in Venice, FL
We proudly serve Venice, FL and the surrounding area, including Nokomis, Osprey, Englewood, North Port, Port Charlotte, Rotonda West, Boca Grande, Punta Gorda, Sarasota and beyond.
Overview
Repair or Reupholster? How We Decide
Not every boat seat needs a full reupholstery. A split seam on the helm bench, one torn panel on a bolster, a cushion that has gone flat or a cracked corner on a bow pad can usually be repaired for a fraction of a full interior, and usually in days rather than weeks. Apogee Upholstery repairs boat seats and cushions at our shop in Venice, FL for owners across Sarasota and Charlotte counties.
We tell you honestly which repairs are worth doing. If the vinyl has gone brittle everywhere, a patch will fail at the next seam and we will say so. If the damage is local and the rest of the seat is sound, a repair is the smart money. Either way, you get a clear quote before any work starts.
Local damage, sound vinyl
A single tear, a popped seam, a chewed corner or one sun-rotted panel on an otherwise supple seat: repair.
Flat but intact
If the cover is fine but the seat has collapsed, new foam under the existing cover brings the seat back without new vinyl.
Brittle everywhere
If the vinyl cracks when you fold it, repairs will chase failures from seam to seam. That seat needs a new cover.
Hardware and bases
Broken hinges, rusted snaps and soft base boards are repairs on their own, and often the reason a seat looks worse than it is.
What we do
Boat Seat & Cushion Repairs We Do
Seam & Stitching Repair
The seam is usually the first failure point on marine upholstery, because standard thread rots long before the vinyl does. We open the seam, re-sew it with UV-resistant thread and reinforce the stress points.
- Re-stitching in UV-rated bonded or PTFE thread
- Reinforced corners and stress points
- Same-color thread matched to the original
Single Panel Replacement
When one panel is torn or sun-rotted, we replace that panel with matching marine vinyl rather than patching over it. A sewn-in panel looks right and lasts; a glued patch does not.
- Panel patterned from the original
- Color and grain matched as closely as the material allows
- Original piping and welting kept
Foam Replacement in One Cushion
A seat that has gone flat or lumpy usually has waterlogged foam. We open the cushion, replace the foam with closed-cell marine foam cut to the original profile and reassemble the existing cover.
- Closed-cell foam that does not hold water
- Profile restored to the original shape
- Existing cover reused when it is still sound
Cushion Re-Cover
Bow pads, cockpit cushions and jump seats are often cheaper to re-cover than to repair. We make a new cover for the single cushion and match it to the rest of the boat.
- One cushion at a time
- Matched to existing colors
- New foam if the old is wet
Snaps, Hinges, Zippers & Base Boards
Rusted snaps, broken hinges, seized zippers and soft plywood bases make good upholstery look bad. We replace hardware with stainless and rebuild bases in marine plywood or composite.
- Stainless snaps and hinges
- Marine zippers and sliders
- Rot-proof base boards
Jet Ski & PWC Seat Repair
Jet ski seats split along the seams and soak up water through the foam. We re-stitch, replace panels or re-cover the seat and replace the foam when it is waterlogged.
- Seam repair and panel replacement
- Full re-cover in grippy marine vinyl
- Foam replacement for waterlogged seats
Experience
What We Repair
- Helm seats and bench seats
- Flip-up bolsters and leaning posts
- Bow pads and cockpit cushions
- Jump seats and cooler seats
- Pontoon lounge sections and lids
- Jet ski and PWC seats
- Captain's chairs
- Sailboat cockpit cushions
Materials We Use
- Marine-grade vinyl
- Matched as closely as possible to the original in color and grain, with UV inhibitors and mildew-resistant backing.
- UV-resistant thread
- Bonded polyester or PTFE thread so the repaired seam outlasts the surrounding ones.
- Closed-cell marine foam
- For any cushion opened during the repair, so it does not go flat or soak up water again.
- Stainless hardware
- Snaps, hinges, staples and zipper sliders that do not rust.
How it works
Our Process
- 1
Send photos
Clear photos of the damage and the whole seat through the contact page are usually enough for us to say repair or re-cover and give a quote.
- 2
Honest assessment
We check the vinyl, foam, base and hardware and tell you what is worth repairing and what is not.
- 3
Match the material
We match the vinyl color and grain from our samples; exact matches are not always possible on faded vinyl, and we will show you the closest option.
- 4
Repair and return
Most single-seat repairs are done within days once materials are in. Bring the seat, or the boat, and pick it up finished.
Track record
The Numbers Speak for Themselves
- 0+
- Years of industry experience
- 0%
- Customer satisfaction guarantee
- 0★
- Rated service on Google
- 0+
- Cities served across SW Florida
Why Apogee
Why Boat Owners Bring Seat Repairs to Apogee
Our team works closely with you to design and install the right upholstery, canvas or cover, balancing function and style. Whether it is a simple repair or a full custom interior, we guarantee results that stand the test of time.
- ✓Honest call on repair versus re-cover before any work starts
- ✓Sewn-in panels and re-stitched seams, not glued patches
- ✓Color and grain matched from a wide range of marine vinyl
- ✓Single seats and cushions welcome; no minimum job
- ✓Most repairs finished in days, not weeks
- ✓Serving Venice, Nokomis, Osprey, Englewood, North Port, Port Charlotte, Punta Gorda and Sarasota
Portfolio
Recent Projects
FAQ
Boat Seat Repair FAQ
Can you repair just one torn boat seat?
Yes. Single-seat and single-panel repairs are a large part of what we do. Send photos of the damage and the whole seat and we will quote a repair or, if the vinyl is brittle, a re-cover of that one seat.
Can a tear in marine vinyl be patched?
A glued patch is a temporary fix at best and usually fails in Florida sun within a season. We replace the damaged panel with a sewn-in piece of matching vinyl, which looks right and lasts as long as the rest of the seat.
Will the repaired panel match my seats?
We match color and grain from a wide range of marine vinyl. On older, faded seats an exact match is not always possible; we show you the closest option before we cut.
My seat is not torn, just flat. Can you fix that?
Yes. A flat seat with a sound cover usually needs new foam. We open the cushion, replace the foam with closed-cell marine foam cut to the original profile and reassemble your cover.
How long does a boat seat repair take?
Most single-seat repairs are finished within a few days of materials arriving. Bring the seat alone if it unbolts easily, or the whole boat on its trailer.
Do you repair jet ski seats?
Yes. We re-stitch seams, replace panels and re-cover jet ski and PWC seats, and replace waterlogged foam.
Serving Southwest Florida
Our shop is at 420 E Venice Ave, Venice, FL 34285, with trailer parking for drop-offs. We regularly work with customers from:
- Venice, FL
- Nokomis, FL
- Osprey, FL
- Englewood, FL
- North Port, FL
- Port Charlotte, FL
- Rotonda West, FL
- Boca Grande, FL
- Punta Gorda, FL
- Sarasota, FL
Other Services
Ready to upgrade? Let's talk about your boat seat repair project.
Give your boat, car, RV or golf cart the upgrade it deserves with custom-crafted cushions, covers and finishes built for comfort, durability, and style.